Technical information

1. Shut down the system from the system console.
2. Open the cabinet front door and turn off both main power switches. (See Figure 4-1.)
3. Open the cabinet rear door.
4. Using a small flat blade screwdriver, disconnect the end of the PCI backplane power cable (AW-001047)
from connector J008 or J009 (depending on which cable is faulty) on the Tray 2, rear. (See Figure 4-53.)
Figure 4-53. Disconnecting the PCI Backplane Power Cable from Tray 2 ( rear) (J009 plug is shown
here)
5. Open the cabinet front door.
6. Open the access door to the PCI backplane. (See Figure 4-3.)
7. Disconnect the other end of the AW-001047 cable from the PCI backplane. (See Figure 4-54.)