Technical information

4.5.10. Disk Shelf Power Cable (AW-001036)
1. Shut down the system from the system console.
2. Open the cabinet front door and turn off both main power switches. (See Figure 4-1)
3. Open the cabinet rear door.
4. Disconnect the faulty AW-001036 disk shelf power cable from both the Molex connectors (P2 and P3)
connecting to AW-001038 which attaches to the AC power chassis). (See Figure 4-40.)
Figure 4-40. Disconnecting the Disk Shelf Power Cable from the Molex Connectors
5. Disconnect the faulty AW-001036 disk shelf power cable connector from the plug at the far right of the
disk shelf rear. (See Figure 4-41.)