Specifications

We recommend using a connector such as Molex part number 87259-
4413 or equivalent for 2.5-inch drives attached to flexible cables or
printed circuit cables. Some Seagate 2.5-inch drives are designed to
support the industry-standard MCC direct-mounting specifications (see
drive product manual for details). MCC-compatible connectors (such as
Molex part number 87368-442
x or equivalent) and mounting hardware
must be used with these drives in fixed-mounting applications.
0.039 ± 0.003 (0.99 ± 0.08)
1.654 (42.01)
0.020 ± 0.002
(0.51 ± 0.05)
0.079 ± 0.003 (2.00 ± 0.08)
0.152 ± 0.005
(3.86 ± 0.13)
2.212 (56.18)
0.161 (4.09) ref
0.039 ± 0.003
(0.99 ± 0.08)
0.079 ± 0.003 ( 2.00 ± 0.08)
0.020 ± 0.002
(0.51 ± 0.05)
0.157 (4.00)
Dimensions are in inches (mm)
0.158 ± 0.003 (4.00 ± 0.08)
Master/slave jumpers
Figure 5. 50-pin male ATA interface connector for 2.5-inch drives
6 ATA Interface Reference Manual, Rev. C