Datasheet

82 Medalist Pro Product Manual, Rev. D
12 00 No address mark in ID field N
13 00 No address mark in data field N
14 00 Sector not found Y
14 01 No record found N
15 00 Seek positioning error Y
15 01 Mechanical positioning error N
15 02 Positioning error determined by reading media N
16 00 Data synchronization mark error Y
17 00 Data recovered without ECC or retries Y
17 01 Data recovered with retries N
17 02 Data recovered with positive head offset N
17 03 Data recovered with negative head offset N
17 05 Data recovered with previous sector ID N
17 06 Data recovered without ECC N
18 00 Data recovered with ECC N
18 01 Data recovered with ECC and retries N
18 02 Data recovered with ECC, retries, and autoreallocation N
19 00 Error in defect list Y
19 01 Defect list not available N
19 02 Error in P-list N
19 03 Error in G-list N
1A 00 Parameter overrun Y
1B 00 Synchronous transfer error N
1C 00 Defect list not found Y
1C 01 P-list not found N
1C 02 G-list not found N
1D 00 Compare error with verify Y
1E 00 Recovered ID error N
20 00 Drive received invalid operation code Y
21 00 LDA out of range Y
24 00 CDB with invalid bit Y
25 00 CDB with invalid LUN Y
26 00 CDB with invalid field Y
26 01 CDB with unsupported parameter N
26 02 CDB with invalid parameter N
26 03 CDB with unsupported threshold parameter N
27 00 Write protected Y
29 00 Power-on or pin 40 bus reset occurred Y
2A 00 Parameters changed by another initiator N
2A 01 Mode select parameters changed by another initiator Y
2A 02 Log parameters changed Y
2F 00 Tagged commands cleared by another initiator Y
31 00 Format command failed Y
32 00 Defect locations not available Y
Sense
key Description Supported