Technical data

73
9 Peripherals
This chapter provides information on configuring peripherals in all rack-mount systems.
Up to six SCSI devices may be added to the system drive bays. The following table defines the
standard drive locations when drives are factory installed.
Location
Drive SCSI ID
1 - Left Vertical System disk drive 0
2 - Right Vertical Add-on disk drive 1
3 - Left Internal Add-on disk drive 2
4 - Right Internal Add-on disk drive 3
5 - Lower Horizontal CD-ROM drive 4
6 - Upper Horizontal Other drive type 5 or 6
NOTE The SCSI cable MCBL234A provides active termination. All SCSI devices installed in the system
must have termination disabled.
The following figure shows the physical drive locations in the system.
Location 3
Location 4
Location 6
Location 5
Location 2
Location 1