Technical data

44
Jumpers
The system board uses jumpers to set the CPU frequency, enable or disable G95 VGA mode
(MSMT359 only), and clear the BIOS password.
Memory Sockets
J16
BIOS Jumper
VRM
VRM
CPU 1
CPU 0
CPU Frequency
Jumpers
J25
VGA Mode Jumper
CPU Frequency
The 180 MHz CPU uses a 60 MHz P6 bus, with jumpers installed to obtain the 3x multiplier. The
200 MHz CPU uses a 66.67 MHz P6 bus, with jumpers installed to obtain the 3x multiplier.
CAUTION Do not change the jumper settings in an attempt to change CPU speed. The CPUs will only operate
properly when the jumpers are installed in their default settings.