User manual

iSCSI GbE to SAS/SATA II RAID Subsystem
User Manual
93
5.6.3 Upgrade
“Upgrade” can upgrade firmware. Please prepare new firmware file named “xxxx.bin”
in local hard drive, then click “Browse” to select the file. Click “Confirm”, it will pop up
a message “Upgrade system now? If you want to downgrade to the previous FW later
(not recommend), please export your system configuration in advance”, click “Cancel”
to export system configuration in advance, then click “OK” to start to upgrade firmware.
When upgrading, there is a progress bar running. After finished upgrading, the system
must reboot manually to make the new firmware took effect.
NOTE: Please contact your vendor for the latest firmware.