User manual

iSCSI GbE to SAS/SATA II RAID Subsystem
84
User Manual
Step 7: Delete VD (Virtual disk).
To delete the Virtual disk, please follow the procedures:
1. Select “/ Volume configuration / Virtual disk”.
2. Move the mouse pointer to the gray button next to the VD number; click
“Delete”. There will pop up a confirmation page, click “OK”.
3. Done. Then, the VDs are deleted.
NOTE: When deleting VD, the attached LUN(s) related to this VD
will be detached automatically.
Step 8: Delete RG (RAID group).
To delete the RAID group, please follow the procedures:
1. Select “/ Volume configuration / RAID group”.
2. Select a RG which all its VD are deleted, otherwise the this RG cannot be
deleted.
3. Check the gray button next to the RG number click “Delete”.
4. There will pop up a confirmation page, click “OK”.
5. Done. The RG has been deleted.
NOTE: The action of deleting one RG will succeed only when all of
the related VD(s) are deleted in this RG. Otherwise, it will have an
error when deleting this RG.
Step 9: Free global spare disk.
To free global spare disks, please follow the procedures.
1. Select “/ Volume configuration / Physical disk”.
2. Check the gray button next to the PD slot; click “Set Free disk”.
Step 10: Done, all volumes have been deleted.