User manual

iSCSI GbE to SAS/SATA II RAID Subsystem
User Manual
83
Step 4: Set global spare disk.
To set global spare disks, please follow the procedures.
1. Select “/ Volume configuration / Physical disk”.
2. Check the gray button next to the PD slot; click “Set global space”.
3. “Global spare” status is shown in “Usage” column.
Slot 4 is set as global spare disk (GS).
Step 5: Done. LUNs can be used as disks.
To delete VDs, RG, please follow the steps listed below.
Step 6: Detach LUN from VD.
In “/ Volume configuration / Logical unit”,
1. Move the mouse pointer to the gray button next to the LUN; click “Detach”.
There will pop up a confirmation page.
2. Choose “OK”.
3. Done.