User manual

iSCSI GbE to SAS/SATA II RAID Subsystem
User Manual
81
5. Done. RG has been created.
A RAID 5 RG named “RG-R5” with 3 physical disks is created.
Step 2: Create VD (Virtual disk).
To create a data user volume, please follow these steps.
1. Select “/ Volume configuration / Virtual disk”.
2. Click “Create”.
3. Input a VD name, choose the RG when VD will be created, enter the VD
capacity, select the stripe height, block size, read/write mode, set priority,
modify Bg rate if necessary, and finally click “OK”.
4. Done. A VD has been created.
5. Repeat steps 1 to 4 to create another VD.