User manual

iSCSI GbE to SAS/SATA II RAID Subsystem
70
User Manual
Step 2: Confirm page. Click “OK” if all setups are correct.
There is a RAID 0 with 4 physical disks, named “RG-R0”. The second RAID group is a
RAID 5 with 3 physical disks, named “RG-R5”
Step 3: Done. View “RAID group” page.
RG column description:
The button includes the functions which can be excuted.
Name RAID group name.
Total(GB)(MB) Total capacity of this RAID group. The unit can be
displayed in GB or MB.
Free(GB) (MB) Free capacity of this RAID group. The unit can be
displayed in GB or MB.
#PD The number of physical disks in RAID group.
#VD The number of virtual disks in RAID group.
Status The status of RAID group.
“Online”  the RAID group is online.
“Offline”  the RAID group is offline.
“Rebuild”  the RAID group is being rebuilt.
“Migrate”  the RAID group is being migrated.
“Scrubbing”  the RAID group is being scrubbed.
Health The health of RAID group.
“Good”  the RAID group is good.
“Failed”  the hard drive is failed.
“Degraded”  the RAID group is not completed. The
reason could be lack of one disk or disk failure.