User manual

iSCSI GbE to SAS/SATA II RAID Subsystem

User Manual

5.2.5 Notification Setting

“Notification setting” can be used to set up SNMP trap for alerting via SNMP, pop-up

message via Windows messenger (not MSN), alert via syslog protocol, and event log

filter.

“SNMP” allows up to 3 SNMP trap addresses. Default community name is set as

“public”. User can choose the event log levels and default setting only enables INFO

event log in SNMP. There are many SNMP tools. The following web sites are for your

reference:

SNMPc: http://www.snmpc.com/

Net-SNMP: http://net-snmp.sourceforge.net/

Using “Messenger”, user must enable the service “Messenger” in Windows (Start 

Control Panel  Administrative Tools  Services  Messenger), and then event logs

can be received. It allows up to 3 messenger addresses. User can choose the event log

levels and default setting enables the WARNING and ERROR event logs.

Using “System log server”, user can choose the facility and the event log level. The

default port of syslog is 514. The default setting enables event level: INFO, WARNING

and ERROR event logs.