User manual

iSCSI GbE to SAS/SATA II RAID Subsystem
User Manual
45
Step 6: Done.
4.2.2 Volume Creation Wizard
“Volume create wizard” has a smarter policy. When the system is inserted with some
HDDs. “Volume create wizard” lists all possibilities and sizes in different RAID levels,
it will use all available HDDs for RAID level depends on which user chooses. When
system has different sizes of HDDs, e.g., 8*200G and 8*80G, it lists all possibilities and
combination in different RAID level and different sizes. After user chooses RAID level,
user may find that some HDDs are available (free status). It gives user:
1. Biggest capacity of RAID level for user to choose and,
2. The fewest disk number for RAID level / volume size.
E.g., user chooses RAID 5 and the controller has 8*200G + 4*80G HDDs inserted. If we
use all 12 HDDs for a RAID 5, and then the maximum size of volume is 880G (80G*11).
By the wizard, we do smarter check and find out the most efficient way of using HDDs.
The wizard only uses 200G HDDs (Volume size is 200G*7=1400G), the volume size is
bigger and fully uses HDD capacity.