User manual

iSCSI GbE to SAS/SATA II RAID Subsystem
38
User Manual
4.1.3 LCD Control Module (LCM)
After booting up the system, the following screen shows management port IP and
model name:
192.168.10.50
iSCSI-Model
Press “
”, the LCM functions “Alarm Mute”, “Reset/Shutdown”, “Quick
Install”, “View IP Setting”, “Change IP Config” and “Reset to Default” will
rotate by pressing  (up) and  (down).
When there is WARNING or ERROR level of event happening, the LCM also shows the
event log to give users event information from front panel.
The following table is the function description of LCM menus.
System Info Displays System information.
Alarm Mute Mute alarm when error occurs.
Reset/Shutdown Reset or shutdown controller.
Quick Install Quick three steps to create a volume. Please refer to next
chapter for operation in web UI.
Volume Wizard Smart steps to create a volume. Please refer to next chapter
for operation in web UI.
View IP Setting Display current IP address, subnet mask, and gateway.
Change IP Config Set IP address, subnet mask, and gateway. There are 2
selections, DHCP (Get IP address from DHCP server) or set
static IP.
Reset to Default Reset to default sets password to default: 00000000, and set
IP address to default as DHCP setting.