User manual

iSCSI GbE to SAS/SATA II RAID Subsystem
32
User Manual
3.3.2 Installing a SATA Disk Drive (Dual Controller Mode) in a Disk Tray
1. Remove an empty disk tray from the subsystem.
2. Prepare the dongle board and two screws.
3. Place the dongle board in the disk tray. Turn the tray upside down. Align the two
screw hole of the dongle board in the two Hole D of the disk tray. Tighten two
screws to secure the dongle board into the disk tray.