User manual

iSCSI GbE to SAS/SATA II RAID Subsystem

User Manual

3.3 Disk Drive Installation

This section describes the physical locations of the hard drives supported by the

subsystem and give instructions on installing a hard drive. The subsystem supports

hot-swapping allowing you to install or replace a hard drive while the subsystem is

running.

3.3.1 Installing a SAS Disk Drive in a Disk Tray

1. Unlock the Disk Trays using a flat-head screw driver by rotating the Lock Groove.

2. Press the Tray Open button and the Disk Tray handle will flip open.

3. Pull out an empty disk tray.

Tray

Open

utto