User manual

iSCSI GbE to SAS/SATA II RAID Subsystem
User Manual
23
2.2.1 Controller Module Panel
1. Uninterrupted Power Supply (UPS) Port (APC Smart UPS only)
The subsystem may come with an optional UPS port allowing you to connect an APC
Smart UPS device. Connect the cable from the UPS device to the UPS port located at
the rear of the subsystem. This will automatically allow the subsystem to use the
functions and features of the UPS.
2. R-Link Port: Remote Link through RJ-45 Ethernet for remote management
The subsystem is equipped with one 10/100 Ethernet RJ45 LAN port for remote
configuration and monitoring. You use web browser to manage the RAID subsystem
through Ethernet.
3. LAN Ports (Gigabit)
The subsystem is equipped with four LAN data ports for iSCSI connection.
4. Controller Status LED
 Green  Controller status normal or in the booting.
 Red  Other than above status.
5. Master/Slave LED
 Green  Master controller.
 Off  Slave controller.
6. Cache Dirty LED
 Orange  Data on the cache waiting for flush to disks.
 Off  No data on the cache.