User manual

iSCSI GbE to SAS/SATA II RAID Subsystem
User Manual
145
Appendix
A. Certification list
 RAM
RAM Spec: 240-pin, DDR2-533(PC4300), Reg.(register) or UB(Unbufferred), ECC,
up to 4GB, 64-bit data bus width (and also 32-bit memory), x8 or x16 devices,
36-bit addressable, up to 14-bit row address and 10-bit column address.
Vendor Model
ATP AJ56K72G8BJE6S, 2GB DDR2-667 (Unbuffered, ECC) with
Samsung
Kingston KVR667D2E5/2G, 2GB DDR2-667 (Unbuffered, ECC) with Hynix
Kingston KVR800D2E6/2G, 2GB DDR2-800 (Unbuffered, ECC) with ELPIDA
Kingston KVR800D2E6/4G, 4GB DDR2-800 (Unbuffered, ECC) with ELPIDA
Unigen UG25T7200M8DU-5AM, 2GB DDR2-533 (Unbuffered, ECC) with
Micron
Unigen UG25T7200M8DU-6AMe, 2GB DDR2-667 (Unbuffered, ECC) with
Hynix
Unigen UG25T7200M8DU-6AK, 2GB DDR2-667 (Unbuffered, ECC, Low
profile) with Hynix
Unigen UG51T7200N8DU-8CM, 4GB DDR2-800 (Unbuffered, ECC) with
Hynix
 iSCSI Initiator (Software)
OS Software/Release Number
Microso
f
t
Windows
Microsoft iSCSI Software Initiator Release v2.08
System Requirements:
1. Windows 2000 Server with SP4
2. Windows Server 2003 with SP2
3. Windows Server 2008 with SP2
Linux
The iSCSI Initiators are different for different Linux Kernels.
1. For Red Hat Enterprise Linux 3 (Kernel 2.4), install linux-
iscsi-3.6.3.tar
2. For Red Hat Enterprise Linux 4 (Kernel 2.6), use the build-
in iSCSI initiator iscsi-initiator-utils-4.0.3.0-4 in kernel 2.6.9
3. For Red Hat Enterprise Linux 5 (Kernel 2.6), use the build-in
iSCSI initiator iscsi-initiator-utils-6.2.0.742-0.5.el5 in kernel
2.6.18
Mac
ATTO Xtend SAN iSCSI initiator v3.10
System Requirements:
1. Mac OS X v10.5 or later
For ATTO Xtend SAN iSCSI initiator, it is not free. Please contact your local
distributor.