User manual

iSCSI GbE to SAS/SATA II RAID Subsystem
User Manual
101
6.3 VD Extension
To extend VD size, please follow the procedures.
1. Select “/ Volume configuration / Virtual disk”.
2. Check the gray button next to the VD number; click “Extend”.
3. Change the size. The size must be larger than the original, and then click “OK”
to start extension.
4. Extension starts. If VD needs initialization, it will display “Initiating” in
“Status” and the completed percentage of initialization in “R%” column.
NOTE: The size of VD extension must be larger than original.
IMPORTANT! VD Extension cannot be executed during rebuild or
migration.