User manual

iSCSI GbE to SAS/SATA II RAID Subsystem

User Manual

4.7 SAS JBOD Expansion

4.7.1 Connecting JBOD

This iSCSI RAID subsystem has SAS expansion port to connect to SAS JBOD Expansion

chassis. When a SAS JBOD Expansion chassis is connected and detected, it displays

tabs on the top in “/ Volume configuration / Physical disk”. For example: Local,

JBOD 1 (vendor model), JBOD 2 (vendor model), …etc. Local means disks in local

controller, and so on. The disks in JBOD can be used as local disks.

“/ Enclosure management / S.M.A.R.T.” can displays S.M.A.R.T. information of all

PDs, including Local and all SAS JBODs.