User manual

iSCSI GbE to SAS/SATA II RAID Subsystem
66
User Manual
Step 8: Delete RG (RAID group).
To delete the RAID group, please follow the procedures:
1. Select “/ Volume configuration / RAID group”.
2. Select a RG which is no VD related on this RG, otherwise the VD(s) on this RG
must be deleted first.
3. Check the gray button next to the RG number click “Delete”.
4. There will pop up a confirmation page, click “OK”.
5. Done. The RG has been deleted.
NOTE: The action of deleting one RG will succeed only when all of
the related VD(s) are deleted in this RG. Otherwise, it will have an
error when deleting this RG.
Step 9: Free global spare disk.
To free global spare disks, please follow the procedures.
1. Select “/ Volume configuration / Physical disk”.
2. Check the gray button next to the PD slot; click “Set Free disk”.
Step 10: Done, all volumes have been deleted.