User manual

iSCSI GbE to SAS/SATA II RAID Subsystem
64
User Manual
The steps are as follows:
1. Select a VD.
2. Input “Host” IQN, which is an iSCSI node name for access control, or fill-in
wildcard “*”, which means every host can access to this volume. Choose LUN
and permission, and then click “
”.
3. Done.
VD-R5-1 is attached to LUN 0. VD-R5-2 is attached LUN 1.
NOTE: The matching rules of access control are from the LUNs’
created time, the earlier created LUN is prior to the matching rules
.
Step 4: Set global spare disk.
To set global spare disks, please follow the procedures.
1. Select “/ Volume configuration / Physical disk”.
2. Move the mouse pointer to the gray button next to the PD slot; click “Set
Global spare”.
3. “Global spare” icon is shown in “Usage” column.