User manual

iSCSI GbE to SAS/SATA II RAID Subsystem
62
User Manual
3.6.7 Example
The following is an example for creating volumes. Example 1 is to create two VDs and
set a global spare disk.
 Example 1
This example is to create two VDs in one RG, each VD shares the cache volume.
The cache volume is created after system boots up automatically. Then set a
global spare disk. Last, delete all of them.
Step 1: Create RG (RAID group).
To create the RAID group, please follow these steps:
1. Select “/ Volume configuration / RAID group”.
2. Click “
“.
3. Input an RG Name, choose a RAID level from the list, click
“
” to choose the RAID PD slot(s), then click
“
”.
4. Check the setting. Click “
” if all setups are correct.
5. Done. An RG has been created.
A RAID 5 RG named “RG-R5” with 3 physical disks is created.