User manual

iSCSI GbE to SAS/SATA II RAID Subsystem
48
User Manual
Step 2: Please select the combination of the RG capacity, or “Use default
algorithm” for maximum RG capacity. After RG size is chosen, click
“
”.
Step 3: Decide VD size. User can enter a number less or equal to the default number.
Then click “
”.
Step 4: Confirm page. Click “
” if all setups are correct. Then a
VD will be created.
Done. You can start to use the system now.
A RAID 0 Virtual disk with the VD name “QUICK13573”, named by the system itself, with
the total available volume size of 1862GB.