User manual

iSCSI GbE to SAS/SATA II RAID Subsystem
24
User Manual
2.10 Enclosure
2.10.1 LCD Control Module (LCM)
There are four buttons to control the LCM. These are:
c(Up) d(Down)
(Escape) (Enter)
After booting up the system, the following screen shows management port IP and
model name:
192.168.10.50
iSCSI-Model
Press “
”, the LCM functions “Alarm Mute”, “Reset/Shutdown”, “Quick
Install”, “View IP Setting”, “Change IP Config” and “Reset to Default” will
rotate by pressing c (up) and d (down).
When there is WARNING or ERROR level of event happening, the LCM also shows the
event log to give users event information from front panel.