User manual

iSCSI GbE to SAS/SATA II RAID Subsystem
User Manual
23
2.9.2 Console Serial Port
Use NULL modem cable to connect console port.
The console setting is baud rate: 115200, 8 bits, 1 stop bit, and no parity.
Terminal type: vt100
Login name: admin
Default password: 00000000
2.9.3 Remote Control – Secure Shell
SSH (secure shell) is required for remote login. The SSH client software is available at
the following web site:
SSHWinClient WWW: http://www.ssh.com/
Putty WWW: http://www.chiark.greenend.org.uk/
Host name: 192.168.10.50 (Please check your DHCP address for this field.)
Login name: admin
Default password: 00000000
NOTE: This iSCSI RAID Series only support SSH for remote
control. For using SSH, the IP address and the password is
required for login.