User manual

iSCSI GbE to SAS/SATA II RAID Subsystem

User Manual

2.9 Management Methods

There are three management methods to manage the iSCSI RAID subsystem described

as follows:

2.9.1 Web GUI

The iSCSI RAID subsystem supports graphical user interface to manage the system. Be

sure to connect LAN cable to your R-Link port. The default setting of management port

IP is DHCP and the DHCP address displays on LCM; user can check LCM for the IP first,

then open the browser and type the DHCP address: (The DHCP address is dynamic and

user may need to check every time after reboot again.) When DHCP service is not

available, the system uses zero config (Zeroconf) to get an IP address.

E.g., on LCM. The iSCSI RAID subsystem gets a DHCP address 192.168.10.50 from

DHCP server.

192.168.10.50

iSCSI-Model

http://192.168.10.50 or https://192.168.10.50 (https: connection with

encrypted Secure Sockets Layer (SSL). Please be aware of the https function

is slower than http.)

Click any function at the first time; it will pop up a dialog box to authenticate current

user.

Default password: 00000000

Or login with the read-only account which only allows seeing the configuration and

cannot change setting.

Default password: 1234