User manual

iSCSI GbE to SAS/SATA II RAID Subsystem
User Manual
13
Chapter 2 Getting Started
2.1 Packaging, Shipment, and Delivery
 Before removing the subsystem from the shipping carton, you should visually
inspect the physical condition of the shipping carton.
 Unpack the subsystem and verify that the contents of the shipping carton are all
there and in good condition.
 Exterior damage to the shipping carton may indicate that the contents of the
carton are damaged.
 If any damage is found, do not remove the components; contact the dealer where
you purchased the subsystem for further instructions.
2.2 Unpacking the Subsystem
The package contains the following items:
• iSCSI RAID subsystem
• Two power cords
• Five Ethernet LAN cables
• One external null modem cable
• Installation Reference Guide
• Spare screws, etc.
If any of these items are missing or damaged, please contact your dealer or sales
representative for assistance.