User manual

iSCSI GbE to SAS/SATA II RAID Subsystem
User Manual
113
In the figure above, choose “OK” for 64bit OS, choose “Cancel” for 32bit
OS, this step will change block size to 4K automatically.
2. Move the mouse pointer to the gray button next to the VD number; click
“More information”. Look at the block size; 512B for 64bit OS setting, 4K
for 32bit OS setting.
Step 2: Configure host/server
1. Follow the installation guide provided by HBA vendor, install HBA driver
properly. For iSCSI models, please install the latest Microsoft iSCSI initiator
from the link below.
http://www.microsoft.com/downloads/details.aspx?FamilyID=12cb3c1a-15d6-
4585-b385-befd1319f825&DisplayLang=en
Step 3: Initialize/Format/Mount the disk
1. Go to Start Æ Control Panel Æ Computer Management Æ Disk Management, it
displays a new disk.