User manual

iSCSI GbE to SAS/SATA II RAID Subsystem
User Manual
111
5. Click “Targets”.
6. Click “Log On”. Check “Enable multi-path” if running MPIO.
7. Click “Advance…” if CHAP information is needed.
8. Click “OK”. The status would be “Connected”.
9. Done, it can connect to an iSCSI disk.
The following procedure is to log off iSCSI device.
1. Click “Details” in “Targets”.
2. Check the Identifier, which will be deleted.
3. Click “Log off”.
4. Done, the iSCSI device is logged off successfully.