User manual

iSCSI GbE to SAS/SATA II RAID Subsystem
110
User Manual
B. Known issues
1. Microsoft MPIO driver is not supported on Windows XP and Windows 2000
Professional.
Workaround solution: Use Windows Server 2008/2003 or Windows 2000
Server to run MPIO.
2. When two controllers (with SAS JBOD expansion ports) connect to JBOD
expansion chassis (SAS JBOD), they can not detect all PDs of JBOD.
Workaround solution: It’s a JBOD limitation.
C. Microsoft iSCSI Initiator
Here is the step by step to setup Microsoft iSCSI Initiator. Please visit Microsoft
website for latest iSCSI initiator. The following setup may not use the latest Microsoft
iSCSI initiator.
1. Run Microsoft iSCSI Initiator.
2. Click “Discovery”.
3. Click “Add”. Input IP address or DNS name of iSCSI storage device.
4. Click “OK”.