User manual

iSCSI GbE to SAS/SATA II RAID Subsystem
108
User Manual
build-in iSCSI initiator iscsi-initiator-utils-4.0.3.0-4 in
kernel 2.6.9
3. For Red Hat Enterprise Linux 5 (Kernel 2.6), use the
build-in iSCSI initiator iscsi-initiator-utils-6.2.0.742-
0.5.el5 in kernel 2.6.18
Mac
ATTO Xtend SAN iSCSI initiator v3.10
System Requirements:
1. Mac OS X v10.5 or later
For ATTO Xtend SAN iSCSI initiator, it is not free. Please contact your local
distributor.
 iSCSI HBA card
Vendor Model
HP NC380T (PCI-Express, Gigabit, 2 ports, TCP/IP offload,
iSCSI offload)
QLogic QLA4010C (PCI-X, Gigabit, 1 port, TCP/IP offload, iSCSI
offload)
QLogic QLA4052C (PCI-X, Gigabit, 2 ports, TCP/IP offload, iSCSI
offload)
 NIC
Vendor Model
HP NC7170 (PCI-X, Gigabit, 2 ports)
HP NC360T (PCI-Express, Gigabit, 2 ports, TCP/IP offload)
IBM NetXtreme 1000 T (73P4201) (PCI-X, Gigabit, 2 ports,
TCP/IP offload)
Intel PWLA8492MT (PCI-X, Gigabit, 2 ports, TCP/IP offload)
 GbE Switch
Vendor Model
Dell PowerConnect 5324
Dell PowerConnect 2724
Dell PowerConnect 2708
HP ProCurve 1800-24G
 Hard drive
The iSCSI RAID system supports SATA I and SATA II drives.
Vendor Model
Hitachi Deskstar 7K250, HDS722580VLSA80, 80GB, 7200RPM, SATA,
8M
Hitachi Deskstar E7K500, HDS725050KLA360, 500GB, 7200RPM, SATA
II, 16M