User guide

Configuring Event Settings | 95
800-19403 - A - 12/2014
Configuring Alarm Outputs
To configure alarm outputs
1. Go to Main Menu > Setting > Event > Alarm Output.
2. On the Alarm Output page, set the alarm type for each alarm output:
3. To turn off triggered alarm outputs, next to Alarm Release, click OK.
4. Click Apply to save your changes, and then click OK.
•Schedule Select the alarm output(s) that you want to apply the recording
schedule settings to. For more details, see Configuring the Video
Recording Schedule on page 48 and Configuring the Snapshot
Recording Schedule on page 49.
•Manual Select the alarm output(s) that you want to enable for all channels.
•Stop Select the alarm output(s) that you want to disable for all channels.