User guide
Configuring Network Settings | 81
800-19403 - A - 12/2014
Configuring Alarm Center Settings
To configure the alarm center
1. Go to Main Menu > Setting > Network > Alarm Center.
2. On the Alarm Center page, select the Enable check box to enable the alarm center
function.
3. Configure the following settings:
4. Set the Selfreport Time (daily or weekly at a particular time, or never).
5. Click Apply to save your settings.
6. If you want to exit the Setting menu, click Save.
•Protocol Type Select Private.
•Server IP Enter the server address of your alarm platform.
•Port Enter the port of your alarm platform.