User guide

Configuring Network Settings | 69
800-19403 - A - 12/2014
To configure port settings
1. Go to Main Menu > Setting > Network > Connection.
2. On the Connection page, you can configure the following settings:
3. Click Apply to save your settings.
4. If you want to exit the Setting menu, click Save.
Note You must restart the DVR to apply any changes to the DVR’s port settings.
Ensure that the port settings do not conflict with each other.
•Max Connection Select a value between 0 and 20. The default setting is 20.
•TCP Port Select a value between 1025 and 65535. The default setting is
37777.
•UDP Port Select a value between 1025 and 65535. The default setting is
37778.
• HTTP Port Select a value between 0 and 65535. The default setting is 80.
• HTTPS Port Select a value between 0 and 65535. The default setting is 443.
• RTSP Port Select a value between 0 and 65535. The default setting is 554.