User guide

www.honeywell.com/security

50 | Performance Series HQA Digital Video Recorder User Guide

To configure snapshot recording settings

1. Go to Main Menu > Setting > Camera > Encode > Snapshot.

2. On the Snapshot tab, configure the following settings:

3. Click Apply to save your settings.

4. To copy the settings to additional channels, click Copy, select the channels that you want

to copy the settings to, and then click OK.

Note The DVR assigns event-activated snapshots a higher priority than

schedule-activated snapshots. If you have enabled both of these types of

snapshots, then the system activates an activation snapshot when an alarm

occurs. If there is no alarm, then the DVR takes snapshots according to the

schedule setup.

• Snap Number

Select the number of snapshots to take at a time.

• Channel

Select the channel that you want to configure the settings for.

•Mode

Select

Timing

to take snapshots according to a schedule.

Select

Trigger

to take snapshots when a

motion detection, video

loss, video tampering, or alarm event occurs

•Image Size

Select a file size (

HD1

2CIF

CIF

•Image Quality

Select a value between

and

, with

being the highest quality.

• Snapshot Frequency

Select a value between

1 SPL

(second per picture) and

7 SPL

click

Customized

to enter your own setting.