User guide

www.honeywell.com/security
38 | Performance Series HQA Digital Video Recorder User Guide
Configuring PTZ Connection Settings
Before you can control a PTZ camera with the DVR, you must configure the PTZ connection
settings.
To configure the PTZ connection settings
1. Go to Main Menu > Setting > System.
2. In the left navigation pane, click Pan/Tilt/Zoom.
3. Configure the following settings:
4. Click Apply, and then click Save to save your settings and exit.
•Channel
Select the channel (camera) that you want to configure PTZ settings for.
• Control Mode Select Serial .
•Protocol Select the camera’s PTZ control protocol from the list.
• Address Enter the camera’s address (ID).
•Baudrate Select a value between 1200 and 115200 . The default setting is 9600 .
• Data Bits Select a value between 5 and 8 . The default setting is 8 .
•Stop Bits Select 1 , 1.5 , or 2 . The default setting is 1 .
•Check Select None , Odd , Even , Mark , or Space .