User guide

www.honeywell.com/security
32 | Performance Series HQA Digital Video Recorder User Guide
Camera Status
Camera status icons appear at the bottom of the channel window.
Camera Toolbar
A camera toolbar is located at the top of each channel window. To display the toolbar, move the
mouse pointer to the top of the channel window.
Video is being recorded
No video signal
Motion detected in scene Camera locked
Realtime Playback Play back the previous 5 to 60 minutes of recorded video.
Note The playback time is set to 5 minutes by default. You
can change this setting in Main Menu > Setting >
System > General > General > Realtime Play.
Digital Zoom Enlarge a specific area of the image. Click the button to
enable digital zoom and then drag the mouse in the channel
window to select the area that you want to enlarge.
Right-click to undo digital zoom.
Realtime Backup Save a clip to a USB storage device. Click the button to start
recording. Click again to stop recording. The clip is
automatically saved to the connected USB storage device.
Snapshot Save a screen capture to the hard drive or to a connected
USB storage device. To view the captured image, go to Main
Menu > Operation > Search and click the File List button.
Mute Mute the video sound (if applicable). Click the button to mute
sound. Click again to enable sound.
Note Mute only works in single-channel view.