User guide

Configuring System Settings | 119
800-19403 - A - 12/2014
2. On the User tab, click Add User. The Add User page opens.
3. On the Add User page, configure the following settings:
4. Click Save to save your settings.
•User Name Enter a user name for the account.
•Reusable Select the check box to allow multiple clients to access to the
DVR using the same user name.
• Password
Enter a password for the account.
•Confirm Password Re-enter the password.
•Memo Optionally, enter a brief description of the account.
•User MAC Optionally, record the user’s MAC address so that user can only
log in on a specific device on the network. If this field is left blank,
the user can log in on any connected device on the network.
•Group Assign the user to a group ( admin , user , or another group that you
have defined).
• Authority Assign privileges by selecting or clearing check boxes on the
System , Playback , and Monitor tabs.
Note By default, the user group is set up to allow a new user to
monitor live video from all cameras, play back recorded
video from all cameras, control PTZ cameras, view
information, manually control the DVR, back up files, and
adjust color settings. To assign additional privileges,
change the user settings on the Group tab.