User guide

Configuring System Settings | 107
800-19403 - A - 12/2014
3. Click Apply to save your settings.
Configuring Date and Time Settings
To configure the system time setting
1. Go to Main Menu > Setting > System > General > Date&Time.
2. On the Date&Time tab, configure the following settings:
3. Click Apply to save your settings.
• Auto Logout
Set the length of time the DVR waits before logging out an inactive
user. Specify a time between 0 and 60 minutes. The default setting
is 10 min .
• Navigation Select the check box to display the live view toolbar on the live view
screen. Clear the check box to hide the live view toolbar.
• Startup Wizard Select the check box to display the Startup Wizard at startup. Clear
the check box to bypass the Startup Wizard at startup.
•Mouse Speed Set the desired mouse speed using the slider.
• Date Format Select the date format that you want to use for the system time:
YYYY MM DD , MM DD YYYY , or DD MM YYYY .
•Time Format Select the time format that you want to use for the system time:
24-Hour or 12-Hour .
•Date Separator Select the separator that you want to use for the system time:
period (
. ), hyphen ( - ), or forward slash ( / ).
• System Time Enter the system time and time zone, and then click Save .