User`s manual

86
 During the preview playback process, you can not see the channel title and record status
of current channel. It will display the channel title and the record status once you exit the
preview playback.
 During the preview playback, you can not switch the displayed channel or change current
window-display mode.
 Please note, the tour function has the higher priority than the preview playback. System
automatically exits the preview playback function and its corresponding interface when
the tour function started. You can not control the preview playback until the tour function
ended.
5.4.3 Right Click Menu
After you logged in the device, right click mouse, you can see the short cut menu. Please see
Figure 5-17.
 Window split mode: You can select window amount and then select channels.
 Pan/tilt/zoom: Click it to go to PTZ interface.
 Color setting: Set video corresponding information.
 Search: Click it to go to Search interface to search and playback a record file.
 Record control: Enable/disable record channel.
 Remote device: Search and add a remote device.
 Alarm output: Generate alarm output signal manually.
 Main menu: Go to system main menu interface.
Tips:
Right click mouse to go back to the previous interface.
Figure 5-17
5.4.4 Preview Display Effect Setup
5.4.4.1 Video Color
5.4.4.2 Display
From Main Menu->Setting->Display, you can go to the following interface. See Figure 5-18.