User`s manual

83
Figure 5-12
5.3.3 UPNP
Important
Do not connect the switch to the PoE port, otherwise the connection may fail!
Please connect the IPC to the PoE port of the device rear panel (Figure 5-13), system can auto
connect to the network camera. Please note the following figure is for reference only.
Figure 5-13
5.3.4 Built-in Switch Setup
The built-in switch function is for product of PoE port.
From Network->Network Server->Switch, you can set switch IP address, subnet mask, gateway
and etc. See Figure 5-14.
Figure 5-14
5.4 Preview