User`s manual

79
Figure 5-7
5.3 Remote Device
5.3.1 Remote Device Connection
From Mani menu->Remote device or right click mouse on the preview interface and then select
remote device item, you can see the following interface. See Figure 5-8.
Figure 5-8
Click IP search button, you can view the searched IP addresses at the top pane of the interface.
Double click an IP address or check one IP address and then click Add button, you can add
current device to the bottom pane of the interface. System supports batch add function.
Click Add button, you can add a device directly. Here you can set TCP/UPD/auto connection
mode. The default setup is TCP. See Figure 5-9.
Important
Please note the manual add function is for Dahua, Panasonic, Sony, Dynacolor, Samsung, AXIS,
Arecont, ONVIF and Custom. When the type is the custom, you can just input URL address, user
name and password connect to the network camera without considering network camera
manufacture. Please contact your network camera manufacturer for the URL address.