User`s manual

221
Figure 7-100
Please refer to the following sheet for detailed information.
Parameter
Function
Enable tour
Check the box here to enable tour function.
Interval
Here is for you to adjust transparency. The value ranges from 5 to
120s. The default setup is 5s.
Split
Here you can set window mode and channel group. System can
support 1/4/8/9/16/25/36-window according to device channel
amount.
Motion
tour/Alarm
tour
Here you can set motion detect tour/alarm tour window mode.
System supports 1/8-window now.
7.9.5.4 Alarm Out
Please note some series product does not support alarm output function.
The alarm output interface is shown as below. See Figure 7-101
Here you can set alarm output mode: auto/manual/stop.