User`s manual

172
Type
Parameter
Function
IPC external
alarm
It refers to the on-off signal from the network
camera. It can activate the NVR local activation
operation.
No signal
System can generate an alarm when the network
camera and the NVR are disconnected.
Operation
Prompt
Check the box here, system can automatically pops
up an alarm icon on the Alarm button in the main
interface when there is an alarm.
Alarm
Sound
Play alarm
sound
System sends out alarm sound when an alarm
occurs. You can specify as you wish.
Sound path
Here you can specify alarm sound file.
7.9 Setup
7.9.1 Remote
7.9.1.1 Add Device
Add device interface is shown as below. See Figure 7-22.
Figure 7-22