User`s manual

143
Status
HDD can work properly or not.
Bad track
Display there is bad track or not.
Page up
Click it to view previous page.
Page down
Click it to view the next page.
View
recording time
Click it to view HDD record information (file start time and end time).
View HDD
type and
capability
Click it to view HDD property, status and etc,
5.11.3 HDD Management
Here is for you to view and implement hard disk management. See Figure 5-100.
You can see current HDD type, status, capacity and record time. When HDD is working properly,
system is shown as O. When HDD error occurred, system is shown as X.
 Alarm set: Click alarm set button, the interface is shown as below. See Figure 5-101. (This
interface is just like the abnormality setup). Please refer to chapter 5.9.4 for detailed
information.
 HDD operation: You can select HDD mode from the dropdown list such as read-only or you
can erase all data in the HDD. Please note system needs to reboot to get all the modification
activated.
Figure 5-100