User`s manual

137
Figure 5-90
Client show interface is for you to view devices (such as network camera, smart phone)
connected to the WIFI AP. See Figure 5-91.
Figure 5-91
Filter interface is shown as below. See Figure 5-92.
 Max IPC No.: It is the max network camera amount the NVR can connect to via WIFI AP by
default. Click Ok to save current setup.
 Change sort: Click it to adjust video position of the WIFI devices from the first available
channel on the interface.
 Filter: Check the box here to enable black/white list filter function. Please input MAC address.
Select state as valid. Input some memo information for you reference.
 Allowed MAC in the list to access NVR:: Check the box here to enable white list function. In