User`s manual

136
WIFI AP in Figure 5-87 to go to the following interface, it means the restart is still in process.
Please wait.
Figure 5-88
Tips
On the preview interface and then right click mouse, you can see an interface shown as below.
Here you can click WPS button too. See Figure 5-89.
Figure 5-89
Network interface is shown as in Figure 5-90.
It is to set network information of the wireless router of the NVR. After you set network information,
please restart WIFI AP.
 Net Mask: It is to set the network subnet mask of the WIFI AP.
 DHCP start/end: It is to set the IP addresses the NVR can allocate to the network camera.