User`s manual

128
You can view the WIFI connection status in the Network Setting interface. See Figure 5-74. You
can view current connection status and IP address if there is a connection.
Figure 5-74
The WIFI interface is shown as below. See Figure 5-75.
 Auto connect WIFI: Check the box here, system automatically connects to the previous WIFI
hotspot.
 Refresh: You can click it to search the hotspot list again. It can automatically add the
information such as the password if you have set it before.
 Disconnect: Here you can click it to turn off the connection.
 Connect: Here you can click it to connect to the hotspot. System needs to turn off current
connection and then connect to a new hotspot if there is connection of you selected one. See
Figure 5-76.
Figure 5-75