User`s manual

113
Figure 5-55. This function allows you to be informed when video loss phenomenon occurred.
You can enable alarm output channel and then enable show message function.
You can refer to chapter 5.9.1.1Motion detect for detailed information.
Tips:
You can enable preset/tour/pattern activation operation when video loss occurs.
Figure 5-55
5.9.1.3 Camera Masking
When someone viciously masks the lens, or the output video is in one-color due to the
environments light change, the system can alert you to guarantee video continuity. Camera
masking interface is shown as in Figure 5-56. You can enable alarm output channel and then
enable show message function. You can refer to chapter 5.9.1.1Motion detect for detailed
information.
Tips:
You can enable preset/tour/pattern activation operation when video loss occurs.
Note:
In Detect interface, copy/paste function is only valid for the same type, which means you can
not copy a channel setup in video loss mode to camera masking mode.